
Every inspection, repair, and future replacement means somebody has to get onto your roof. Roof anchors can be part of a safe method, depending on the roof design and the work planned. If you’re a strata council planning an apartment roofing Vancouver project, sort this out early, before a leak makes it urgent. A roof is not safe because of anchors alone.
Why Anchors Matter to Owners, Not Only Crews
Roof access is never a one-time event. As a building gets older, inspectors, maintenance workers, and roofing teams all need to access the roof. A planned fall protection system can include suitable anchor points for this work. What you need depends on the work, the roof conditions, the rules, and the system chosen.
Think about access during a re-roof and as part of your long-term maintenance plan. Make that decision before the new membrane is installed, not after. Also, keep records of roof access and safety. On any apartment roofing Vancouver project, the next contractor can then see what was installed and when it was last checked.
What WorkSafeBC Expects When Work Happens on a Roof
Fall protection is a legal requirement for WorkSafeBC roof work at height. Part 11 of the OHS Regulation requires an employer to use a fall protection system where a fall of 3 metres (10 feet) or more may occur. It also applies where a shorter fall carries a greater risk of injury. A written fall protection plan is required in certain situations and must be on site before the work begins.
Assess fall hazards before work starts. Use equipment that suits the task and train workers to use it. WorkSafeBC's Part 11 guidelines explain how the rules apply, so check them and do not work from assumptions.
The Regulation does not specify one anchor layout for every apartment roof. The fall protection plan for your roof and job determines the arrangement.
Anchors and the Roof Membrane
There is an anchor attached to the roof structure and the way this anchor is attached impacts waterproofing. The long-term inspection plan, structural attachment, and roof assembly should be considered together.
Proper detailing required for penetration
Some anchors penetrate the membrane, others attach in alternative ways. If there is a penetration, it must be detailed to keep water out. Also, the fixing means should be suitable for the roof assembly and the structure beneath.
Roofers and anchor installers may need to coordinate to avoid undoing each other’s work. Many apartment buildings have low slope roof system and drainage around any opening is important. A poorly defined penetration or a rushed repair can become a leak path. That doesn’t mean all anchors leak.
Withdrawal from service and examination
The anchors and related equipment shall be inspected regularly. Check for any visible damage, corrosion, loose parts and signs of water entry. Follow manufacturer’s instructions and applicable inspection requirements. WorkSafeBC also has a guideline on inspection and removal from service of fall protection anchors.
Do not use damaged or doubtful equipment until it has been assessed by a qualified person. Maintain written records of inspections and maintenance.
Planning Anchors into a Re-Roof
Review anchors before a re-roof starts. Begin with what is already there and what paperwork exists. Then check whether the system suits the roof layout and future access needs. Do not assume old anchors should stay or go. Their condition and suitability determine that.
Bring in a qualified anchor specialist where needed. Plan attachment details and waterproofing alongside the new membrane. Confirm who handles inspection, documentation, and handover. Good apartment roof services build this into the project from the start.
Our page on apartment roofing in Vancouver explains how we approach these buildings, and our condominium roofing Vancouver page covers related buildings.
Questions to Ask Before Work Starts
Put these questions to your roofing contractor, property manager, or anchor specialist:
- Are the existing anchors surveyed and recorded?
- Does this work fit the desired fall protection arrangement?
- The anchors are fitted, inspected and certified by whomsoever is required to be certified.
- What is the method for penetrations and waterproofing?
- What will our records be when the work is done?
- Whose responsibility will future inspections and maintenance be?
Assign responsibility for each item before the project begins. Anchor-specific work should be confirmed with us or a qualified specialist.
If you're unsure where to start, speak with an apartment roofing expert before writing the project scope. Roof anchors affect safety, leak risk, and every repair that follows. Ask these questions now and keep the answers on file.
Why Choose GoodVans Roofing?
At GoodVans Roofing, we plan roof repairs and replacements on apartment and strata buildings with future maintenance in mind. Our apartment roofing Vancouver work starts with the building, its roof membrane, and how people reach the roof.
When you compare apartment roofing company Vancouver options, ask how each company plans roof access and coordinates with other specialists. We explain the scope and next steps in plain terms. See our strata roofing services for more.
FAQs
1. Does an apartment building roof need permanent anchors?
Not always. It depends on the roof, how often people need access, the work being done, and the fall protection rules that apply. Some jobs use other methods. The fall protection plan for your roof is where to get a clear answer.
2. Who looks after roof anchors on a strata building?
It depends on ownership, contracts, maintenance plans, and the rules that apply. Strata councils should confirm who handles inspections, records, and repairs and get that in writing.
3. Can roof anchors cause leaks?
They can if a penetration is badly detailed or poorly maintained. Some installations go through the membrane and need proper waterproofing. Careful design, installation, and inspection help manage that risk.
4. Are anchors replaced during a re-roof?
Sometimes. It depends on the condition, compatibility, and documentation of the existing anchors. Assess them first, then decide whether to keep, repair, or replace them.
About the Author
Taran is Site Manager at GoodVans Roofing. Taran draws on roofing experience, site management, and roof maintenance to give practical guidance to apartment and strata property owners.